"Had this idea for a couple years. Go fanless with relatively large radiators and full copper on a wall mounted custom ‘case’. I’ve seen projects similar, but not all in the same build. Without the fans, I knew I would need to watercool nearly everything and have a fairly large mass of water because the passive cooling would need some extra time in my heat sink. My ‘heat sinks’ are 3/4” base board and have roughly 10’ of it combined. I believe I have about 7500mL of coolant. Coolant is a 10:1 mix of automotive antifreeze. Recently finished so don’t have extended loads (8hrs so far), but I haven’t got water temps higher than 35."
Source: reddit
